PowerTrays – Switch-Pros PowerTray – SR, SR5, TRD Sport, Limited – Toyota Tacoma (2005-Curent) PowerTrays

Features:

• PEM® Fasteners with Stainless Steel Screws – Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray.
• 1/8th Inch 5052 Aircraft Aluminum – Possibly a little overkill to use for mounting electrical accessories that tend to weigh in ounces, not pounds. But with the weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles through.
• Waterjet manufacturing – Guarantees precise cuts with an accuracy of ±0.003″, which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.
• Chamfered edges – This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don’t have to worry about cutting your hands or scratching your vehicle’s paint during installation. Also with a 45° chamfer on the edges, you minimize the risk of vibration wearing through the protective sleeving on cables and wires which would short out the circuit.
• Perfect fit – The fender-side bend is bent an additional 10° to match the angle of the factory threaded M8 holes to ensure a level mounting surface.
• Unparalleled stability – Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far side of the tray to the lower inner fender.
• High-Quality JIS Class 10.9 Steel Hardware – Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.
• Power Made Easy – Delivered right to your door with step-by-step installation instructions.

This PowerTray will fit 2nd and 3rd Gen Toyota Tacoma (05-Current) with the following requirements:

• Vacuum booster braking.
• this includes SR, SR5, TRD Sport, and Limited models. These models feature a traditional vacuum booster as opposed to being electronically assisted like in the TRD Off-Road models. Note: Regardless of any bedside stickers or options your Tacoma may have, double-check that you have the vacuum booster behind the master cylinder.
• Automatic transmissions or manual transmissions that do not have the fender-mounted clutch fluid reservoir.
• Unfortunately, PowerTrays will not work with the fender-mounted clutch fluid reservoir (which includes the majority of Tacoma’s prior to 2020) due to the reservoir being mounted in the same location the PowerTray installs.
• So if your Tacoma has a manual transmission and has this reservoir bolted to the inner fender, then shoot us an email with pictures of the reservoir, and please include vehicle info like a year, make, and model of your Tacoma so we can go over options for relocating the reservoir.

Special considerations: 

• Aftermarket hood struts: If you have or plan to install aftermarket hood struts, The PowerTray will need to be spaced out approximately 1/2 inch so the hood strut clears the Switch-Pros power module.
• Superchargers: Unfortunately most supercharged Tacomas have an Air To Water reservoir mounted in the same area the PowerTray is designed to install. So you would need to either relocate that reservoir or you could purchase the Standoff version of this tray and mount it on top of the Factory fuse block lid.