VIAIR – Escapade Heavy Duty Compact Onboard Air System VIAIR

VIAIR’s Escapade Heavy Duty Compact Onboard Air System is a compact, pre-packaged compressed air solution that features an industry-leading, 150PSI rated, 33% duty 400C compressor, an extruded aluminum tank, and all components needed to install a working system capable of tire inflation and air locker actuation. This OBA System comes complete with an onboard pressure switch, automatic coupler and a tire inflation kit.

For up to 35″ tires.

Features:

• 400C 150 PSI VIAIR compressor w/ thermal overload protector (1).
• Extruded aluminum air tank (1).
• Sealed Pressure Switch (110 PSI on, 145 PSI off) (Pre-installed) (1).
• Sealed 40-amp 4-prong relay with pre-wired female socket (1).
• 40-amp relay sealed 4-prong relay w/pre-wired female socket (1).
• Tire inflation gun with 160 PSI gauge.
• 30ft. coil hose with quick connect & stud.
• Rubber tipped bow gun (1).
• Quick connect coupler (Pre-installed) (1).
• 1/4″ 175 PSI safety valve (Pre-installed) (1).
• 1/4″ NPT plugs kit (Pre-installed) (1).
• 1/8″ drain cock (Pre-installed) (1).
• 1/4″ NPT to 1/8″ BSP adaptors (2).
• Air filter housing w/ replacement 
air filter elements (1).
• 20ft. freeze resistant 12-gauge wire 
w/ inline fuse holder (1).

Specifications:

• 12-volt.
• Permanent magnetic motor.
• Duty cycle: 33% @ 100 PSI.
• Max. working pressure: 150 PSI.
• Max. amp draw: 30-amps.
• Ingress protection rating: IP67.
• Max ambient temp: +158°F.
• Min ambient temp: -40°F.
• Dimensions: 9″L x 4″W x 6.75″H.
• Net weight: 10 lbs.

Please note: Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.